 |
| Material Structure |
| The same produce process and application except overlay the solid lubricants into the diamond shaped lubrication indents on the bearing surface, which will offer good friction at the start and process works and keep good condition even no oil giving at short time. So can be used in construction machines, gears, automo-tive clutch pads etc. |
|
|
| Tech.Data |
| Load capacity |
140N/mm2 |
| Temperature limit |
-100℃～+250℃ |
| Speed limit |
1.5M/s |
| Friction clef |
0.06～0.25 |
| PV limit (dry) |
2.6N/ mm2.m/s |
| PV limit (oil) |
15N/mm2.m/s |
|
| Availability |
|
Cylindrical bushes, thrust washers, strip and non-standard parts as the clients supplied drawing |
| Tolerance |
| Recommend housing tolerance is H7 and the shaft is f7 |
|
